Control valves mean a lot, especially to us at Huagong. They provide a measure of how liquids or gases flow through pipes and other systems. Occasionally, these valves can malfunction and need to be repaired. Here is a look at some of the most common issues, with advice on how to fix them.
Typical Valve Problems
The tricky part here is that control valves can get stuck. That’s because they won’t open and close — and that can be a major issue. Another problem is the valve may leak. This stirs up trouble in the system it’s designed to regulate. These types of problems are important to notice so they can be resolved early.
What can be done to fix a Control Valve Issues
In the event you’ve identified a control valve that is stuck, feel free to give it a light tap with a hammer. That might help it ski again. If the valve is leaking, you may want to replace the seals or gaskets. Occasionally, simply cleaning the valve will solve the issue.
Control Valve Problems and Their Solutions
For prevention of valves sticking it is advisable to keep them well oiled. That way, they can glide. If your valve is leaking, look for loose connections or faulty components. Occasionally, simply tightening a connection can stop a leak.
Avoiding ball valves Issues In The Industry
Industrial plants must monitor control valves frequently to ensure they operate properly. This can prevent problems before they occur. You may also want to keep spare valves on hand in case one needs to be replaced in a rush. Valve Troubles Prevention Proper care and maintenance of the valves prevents the issues.
An Introduction to Control Valve Maintenance
Control valves should be cleaned frequently and well lubricated to be kept in operation. It’s also a good idea to test the valves once in a while to insure that they are opening and closing properly. You’ll notice issues, correct them immediately to prevent them from exponentiating.
Over all, control valves are integral to many industrial processes. By understanding common problems, trouble-shooting problems, applying solutions, preventing failures and maintaining valves, we set ourselves up for properly working valves to support and manage our systems. At Huagong we are pleased to supply fine control valves and to offer excellent support for its operation on our client side.
